Factory Cat Mini-HD Rental Tools

We constantly improve the tools we provide to our customers, and in an effort to give you a better understanding and overall experience, we’ve made a page dedicated to do just that. Below is information about the Power Cleaning Equipment you’ve just rented from Bortek– more specifically, the user manual, instruction outline, and even a video about your rental and how to operate it!*

Pre-Op Checks:

Check to see battery is fully charged.
Check the condition of the Pads/Brushes.
Check the condition of the Squeegee blades.
Raise the Scrubdeck and Squeegee before transporting to the filling station.
Fill the water tank.
Pour approved cleaning chemical into the chemical tank.

Operation:

To adjust solution output: Use the left switch characterized by water droplet icon.
To adjust brush pressure: Use the right switch characterized by spinning brush/weights icon.
For chemical cleaning: Use the Suds switch. This allows your machine to clean your floors with what’s in your solution tank. Use Bortek’s premiere cleaning chemical solutions for best results!
For chemical free cleaning: Use the ZerO3 switch. This will activate Factory Cat’s unique ZerO3 Aqueous Ozone Cleaning!
To activate the brushes: Use the switch characterized by spinning brush icon.
To drop squeegee: Move the lever from the left to the right.
For particularly stubborn marks or areas in your facility, try scrubbing over the area once with the vacuum squeegee up, allow the chemical to do its job for a moment, then scrub the area again with the vacuum squeegee down and repeat as necessary (AKA: Double Scrub).

Post-Op Checks:

Drain the recovery tank.
Rinse the recovery tank.
Slide out the debris tray.
Empty out and rinse the debris tray.
Slide debris tray back in.

For your convenience, check the description for the video’s table of contents.

*PLEASE NOTE: Before operation, read the user manual for this rental machine. If you have any questions, contact us immediately! We’re here to help!